Attic spray foam removal in Bath you can trust
Dust-free extraction for homeowners across Bath, Somerset
Attic spray foam removal in Bath is the safe way to clear failed or unwanted foam from your loft. We help homeowners, landlords and buyers across Somerset who need attic insulation removal in Bath before a sale, mortgage or re-roof. Our team handles open cell and closed cell foam, then leaves your loft clean, breathable and ready for new insulation.
What Attic spray foam removal in Bath involves
Attic spray foam removal in Bath is the controlled extraction of polyurethane foam from the underside of your roof deck or between rafters. We start with a boroscope inspection camera and thermal imaging camera to map how far the foam has spread and whether trapped moisture has reached the timbers. Then we cut the foam back with an oscillating multi-tool and reciprocating saw, bag it, and vacuum the dust with a HEPA filter vacuum. Most lofts take one to three days.
Bath homes built before 1950 often have tight roof voids and old felt, so spray foam that was installed to stop draughts can instead trap moisture and rot rafters. If you are buying a house in Somerset and the survey flags foam, you may need attic insulation removal in Bath Somerset before a lender will release funds. We also get calls from owners in Lansdown and Combe Down who want attic spray foam removal near me Bath searches answered by a local team that knows these roofs.
Why clear the foam from your loft
Removing failed spray foam protects the structure of your home and unlocks the sale or remortgage that stalled because of it. Here is what you gain when we carry out attic spray foam removal Bath homeowners can rely on.
Mortgage and sale unlocked
Mortgage refusal due to spray foam is one of the most common reasons a Bath sale falls through. Once we remove the foam and document the roof condition, lenders and surveyors can see the timbers are sound. We have helped buyers in Widcombe and Bear Flat complete purchases that had been stuck for months.
Trapped moisture released
Closed cell spray foam seals the roof deck, so condensation cannot escape and timber starts to rot. We strip the foam, check moisture levels with a moisture meter, and restore airflow. On a typical Bath terrace this drops rafter moisture from 28% to below 18% within a few weeks.
Roof ventilation restored
Reduced roof ventilation shortens the life of your roof covering. Removing foam from the eaves and rafters lets air move again, which protects battens, felt and tiles. We often find this matters most on older Bath stone roofs where replacement costs run into thousands.
Cleaner, safer loft space
We use dust sheets, protective sheeting and a dust extraction unit so foam fragments and isocyanate dust do not spread through your house. The loft is left vacuumed and ready for loft insulation or boarding. Customers in Oldfield Park tell us the space finally feels usable again.
Our attic spray foam removal process
Every job follows the same five stages, from the first survey to the final clean. You get a clear start date, a daily update, and a loft that is ready for whatever comes next.
Survey and quote
We visit your Bath property, inspect the loft with a boroscope inspection camera and thermal imaging camera, and check timber moisture with a moisture meter. You get a fixed price before we start. Surveys usually take 45 to 60 minutes, and we can often quote the same day.
Protect the house
On arrival we lay dust sheets and protective sheeting from the loft hatch to the front door, seal the hatch with a zipped barrier, and set up a dust extraction unit. This keeps foam dust out of your living space. Setup takes around 30 minutes on a typical Bath terrace.
Cut and extract foam
Technicians in PPE respirators cut the foam into manageable sections using an oscillating multi-tool and reciprocating saw, then bag it for disposal. Stubborn patches are removed with a dry ice blasting machine or abrasive blasting media. Expect one to three days depending on loft size and foam thickness.
Clean and inspect
We vacuum every surface with a HEPA filter vacuum and industrial vacuum, then re-inspect the rafters and felt. Any structural timber damage or insulation contamination is photographed and reported to you. This stage usually takes half a day.
Handover and next steps
We walk you through the finished loft, explain what we found, and advise on re-insulation. If you need loft insulation or roof insulation reinstated, we can quote for that too. You receive a written summary you can pass to your lender or surveyor.
Five years of spray foam removal
Platinum Shield Spray Foam has been removing spray foam from Bath lofts since 2021. In that time we have completed hundreds of extractions across Somerset, from single terraces in Twerton to large commercial roofs. Our technicians hold BPCA certification, CHAS accreditation and SafeContractor approval, and we work to PASMA and CITB standards on every site. We keep up to date with BBA certificate guidance and manufacturer data from Isothane, Soudal, BASF, Huntsman, Dow, Recticel, Kingspan, ThermaCool and Envirofoam, so we know how each foam type behaves when it is cut out.
- BPCA certified in safe foam handling and contaminated waste disposal.
- CHAS and SafeContractor accredited for domestic and commercial work.
- NVQ Level 2 Insulation trained technicians on every extraction.
- TrustMark registered and a Which? Trusted Trader for Bath homeowners.
- Specialists in open cell and closed cell spray foam removal.
Why Bath homeowners choose our attic spray foam removal
We are a local team, not a national franchise. That means faster response, honest pricing, and technicians who know the roof styles across Bath and Somerset.
Local to Bath
Our base is in Bath, so we can reach most postcodes within 30 to 45 minutes. That matters when a surveyor needs the foam gone before a deadline. We cover Bath City Centre, Kingsmead, Walcot, Larkhall, Combe Down, Odd Down, Twerton, Whiteway, Southdown, Weston, Newbridge, Lansdown, Widcombe, Bathwick, Bear Flat, Bloomfield, Moorlands, Oldfield Park, Riverside and Sydney Gardens.
Fixed prices, no surprises
You get a written quote after the survey and we stick to it. There are no hidden charges for disposal, access equipment or extra dust sheets. Most residential lofts in Bath fall between 450 and 2,800 depending on size and foam type, and we confirm the figure before booking.
Dust-controlled extraction
We use a dust extraction unit, HEPA filter vacuum and industrial vacuum on every job. Foam dust and isocyanate particles are captured at source, not spread through your home. This is why we can work safely in occupied houses, including those with young children or pets.
Mortgage and lender experience
We regularly work with buyers who need spray foam removal from attic Bath properties before completion. We provide photographic evidence and a written summary that satisfies most lenders and surveyors. If your mortgage has been refused due to spray foam, call us on 0122 528 5137 and we will explain the options.
What our attic spray foam removal includes
Every job includes the survey, protection, extraction, cleaning and handover. We do not charge extra for dust sheets, disposal or a written summary. If you need additional work such as re-insulation or roof repairs, we quote for that separately so you can decide.
Full loft survey
We inspect the foam with a boroscope inspection camera and thermal imaging camera, and check timber moisture with a moisture meter. You get a written report and a fixed price before we start.
Dust-controlled extraction
We seal the loft hatch, lay protective sheeting and run a dust extraction unit and HEPA filter vacuum throughout. Foam dust and isocyanate particles are captured at source, keeping your home clean.
Foam removal and disposal
We cut out open cell and closed cell foam using hand tools, reciprocating saws and, where needed, dry ice blasting. All foam waste is bagged and disposed of through licensed waste carriers.
Post-removal clean
Every surface is vacuumed with an industrial vacuum, and we wipe down rafters and felt. The loft is left ready for inspection, boarding or new insulation. This stage usually takes half a day.
Written handover
You receive a summary of what was removed, photographs of the timbers, and any recommendations for ventilation or re-insulation. This is the document most lenders and surveyors ask to see.
Problems our attic spray foam removal solves
Spray foam that has failed or was installed incorrectly causes problems that get worse over time. Here are the issues we see most often in Bath and how we put them right.
Mortgage refused due to spray foam
Lenders often decline a mortgage when spray foam is present because they cannot inspect the roof timbers. The sale stalls, and buyers may pull out entirely.
We remove the foam, inspect the timbers, and provide photographic evidence and a written summary. Most lenders accept this documentation and release funds once the roof is clear.
Trapped moisture and rot in rafters
Closed cell foam seals the roof deck, so condensation cannot escape. Timber moisture rises above 25%, and rot can take hold within a few years, weakening the structure.
We strip the foam, check moisture levels with a moisture meter, and restore airflow. Where rot is found, we flag it for treatment and can recommend a trusted Bath carpenter.
Spray foam smell and fumes
Some foams continue to off-gas for months, especially isocyanate foam. The smell can drift into bedrooms and cause headaches or irritation for sensitive occupants.
We remove the foam using dust extraction and HEPA filtration, sealing the loft during work. Once the foam is gone, the odour clears within 24 to 48 hours in most cases.
Difficulty selling property
Even if a buyer is willing, their surveyor may value the property lower or recommend a retention. This can knock thousands off the agreed price or delay completion by months.
We provide a clear removal report that satisfies most surveyors. Many Bath sellers find that removing the foam before listing avoids the problem entirely and keeps the sale on track.
When to book attic spray foam removal
You are selling a Bath terrace and the buyer's surveyor has flagged spray foam in the loft.
We survey within days, remove the foam, and supply the documentation your buyer's lender needs. We can usually complete the work within a week of instruction.
The sale proceeds without a retention or price reduction, and you avoid months of back-and-forth.
Your loft smells damp and you have noticed condensation on the roof felt after cold nights.
We inspect with a thermal imaging camera and moisture meter. If the foam is trapping moisture, we remove it and restore ventilation to the eaves and rafters.
The loft dries out, the smell goes, and your roof timbers are protected from further rot.
You are remortgaging and your lender's valuer has asked for evidence that the spray foam has been removed.
We carry out the extraction and provide a written summary with photographs. We can also confirm the roof condition and recommend any ventilation improvements.
Your lender receives the evidence they need, and the remortgage completes without further delay.
A previous owner installed closed cell foam and you want it gone before you re-insulate the loft.
We remove the foam, clean the timbers, and advise on the right loft insulation for your Bath home. We can quote for re-insulation at the same time.
You get a clean, breathable loft with new insulation that meets current standards and performs properly.
Tools and methods we use
Tools & Equipment
Dry ice blasting machine
Lifts foam from delicate surfaces without abrasive damage. Ideal for older Bath roofs where timbers are fragile.
HEPA filter vacuum
Captures fine foam dust and isocyanate particles at source, keeping your home clean and the air safe.
Boroscope inspection camera
Lets us see behind rafters and into eaves without removing roof coverings, so we can map the foam accurately.
Thermal imaging camera
Reveals trapped moisture and cold bridging in the roof structure before we start cutting.
Oscillating multi-tool
Cuts foam neatly around pipework, wiring and trusses with minimal vibration and damage.
Reciprocating saw
Powers through thick closed cell foam and rigid sections quickly, reducing time on site.
Moisture meter
Checks timber moisture before and after removal so we can confirm the roof is drying out.
Methods
Dry ice blasting
We use dry ice pellets to freeze and lift foam from surfaces. It is clean, non-abrasive and effective in awkward corners. The residue is vacuumed away immediately.
Abrasive blasting
For stubborn foam on masonry or steel, we use abrasive blasting media. We contain the dust with sheeting and extraction, and dispose of waste through licensed carriers.
Manual cutting and extraction
Most foam is cut into sections with hand tools, reciprocating saws and oscillating multi-tools, then bagged. This gives us control around services and reduces the risk of damage.
Ventilation restoration
After removal we check eaves, vents and felt to make sure air can move again. Where ventilation is inadequate, we recommend simple fixes such as vent trays or tile vents.
How attic spray foam removal works in Bath
Bath's housing stock is a mix of Georgian terraces, Victorian semis and post-war estates, and each behaves differently when foam is removed. Older properties in Bath City Centre and Widcombe often have tight roof voids and lime mortar, so moisture management matters more than in modern homes. We see a lot of closed cell foam installed in the 2000s and 2010s that has since trapped condensation, especially on north-facing roofs in Combe Down and Lansdown. The local climate is damp for much of the year, and autumn 2026 has already brought heavy rain, so we check timber moisture carefully before and after extraction. If you need attic insulation removal in Bath Somerset for a mortgage or sale, we can usually survey within a few days and complete the work within a week. We also handle attic spray foam extraction Bath jobs where the foam has spread into eaves and needs careful cutting around original stonework.
Service Areas
Many listed buildings with restricted access and original roof timbers. We use hand tools and dust control to protect historic fabric.
A mix of Victorian and 1970s houses, often with closed cell foam that has trapped moisture on north-facing slopes.
Larger detached homes with complex roof shapes. We often find foam around dormers and valleys that needs careful extraction.
Dense terraces with small loft hatches. We use compact equipment and protect stairwells and landings during removal.
Post-war semis with simple roof structures. Foam removal here is usually straightforward and can be completed in a day or two.
Local Considerations
Damp, mild climate with frequent rain
Roof timbers stay wet for longer, so trapped moisture from foam is a bigger risk. We check moisture levels and restore ventilation as standard.
Older roofs with fragile felt and battens
Aggressive removal can damage the roof covering. We use dry ice blasting and hand tools where the felt is brittle.
Tight loft access in Georgian terraces
Small hatches and steep roofs slow the work. We plan access carefully and use compact extraction equipment to keep the job on schedule.
Listed building restrictions
Some Bath properties need consent for alterations. We work within the existing structure and avoid changes that would require listed building consent.
Mortgage rescue in Widcombe
A three-bed terrace in Widcombe had closed cell foam across the entire roof deck. The buyer's lender refused the mortgage, and the sale had been stalled for eight weeks. Timber moisture readings were 27% in two rafters.
We removed the foam in two and a half days, cleaned the loft, and supplied a photographic report. Moisture readings dropped to 16% within three weeks. The lender released funds and the sale completed.
Maintenance & Follow-up
We recommended leaving the loft ventilated and checking moisture again after six months. The new owners plan to fit breathable loft insulation once the roof has fully dried.
A 1930s semi in Combe Down had open cell foam that had been installed to stop draughts. The loft smelled musty and condensation was dripping onto stored boxes. The foam was holding moisture against the felt.
We extracted the foam in a day and a half, vacuumed the space, and restored airflow at the eaves. The smell cleared within 48 hours, and the felt dried out over the following fortnight.
Maintenance & Follow-up
We advised fitting lap vents and keeping the loft clear of stored items. The owner now checks the loft each spring for any signs of damp.
A landlord in Oldfield Park needed to remortgage two rental properties. The valuer flagged spray foam in both lofts and asked for evidence of removal before proceeding. Both lofts had thick closed cell foam around the rafters.
We removed the foam from both properties in four days and provided a single report covering both. The valuer accepted the evidence, and the remortgage completed two weeks later.
Maintenance & Follow-up
We recommended an annual loft inspection and advised the landlord to keep ventilation clear. Both properties were re-insulated with mineral wool after the foam was gone.
How much does attic spray foam removal cost in Bath?
Most residential attic spray foam removal in Bath costs between 450 and 2,800 in 2026, depending on loft size, foam thickness and access. A typical mid-terrace loft of 20 to 30 square metres falls around 900 to 1,600. We provide a fixed quote after a free survey, so you know the exact figure before we start.
Can you remove spray foam from my attic in Bath, Somerset?
Yes. We remove open cell and closed cell spray foam from lofts across Bath and Somerset, including terraces, semis, detached houses and bungalows. We use hand tools, dry ice blasting and HEPA vacuum extraction. Most jobs take one to three days, and we leave the loft clean and ready for new insulation.
Is attic insulation removal near me available in Bath?
We cover all Bath neighbourhoods, including Bath City Centre, Widcombe, Combe Down, Larkhall, Weston and Oldfield Park. Response is usually within 30 to 45 minutes for surveys. If you need attic insulation removal in Bath Somerset urgently for a mortgage deadline, tell us when you call and we will prioritise the booking.
Does attic spray foam removal cause a smell in Bath?
Freshly cut spray foam can release a faint chemical odour for 24 to 48 hours, especially with isocyanate foam. We seal the loft during extraction and use dust extraction and HEPA filtration to keep fumes out of your living space. Most customers notice no smell at all after we finish, and any lingering odour clears within two days.
Trusted and accredited
Certifications
Reviews
Removed spray foam from our loft in Bathwick so we could complete our house purchase. The team was tidy, punctual and explained everything. The report they provided was exactly what our lender needed.
We had foam that smelled and was trapping damp in our Weston semi. Platinum Shield removed it in two days and the loft has been dry ever since. Fair price and no mess.
Used them for a rental property in Twerton. They surveyed quickly, quoted clearly and completed the work within a week. The moisture readings came down and the tenant is happy.
Related Services
Spray Foam Removal near me
If you have been searching for spray foam removal near me in Bath, we cover your postcode. We remove foam from lofts, roofs and cavity walls, and we can usually survey within a few days.
Spray Foam Removal near mesame day Spray Foam Removal
When a surveyor or lender needs foam gone quickly, our same day spray foam removal service can help. We assess the loft and start extraction the same day where access and safety allow.
same day Spray Foam Removal24/7 Spray Foam Removal
For urgent commercial or rental properties in Bath, our 24/7 spray foam removal line is open around the clock. Call 0122 528 5137 and we will arrange the earliest possible slot.
24/7 Spray Foam RemovalResidential Spray Foam Removal
Most of our Bath work is residential spray foam removal from lofts and roof voids. We protect your home with dust sheets and extraction equipment, and we clean up fully before leaving.
Residential Spray Foam RemovalCommercial Spray Foam Removal
We also handle commercial spray foam removal for warehouses, offices and retail units across Somerset. Work is scheduled around your operating hours to minimise disruption.
Commercial Spray Foam Removalloft spray foam removal
Loft spray foam removal is our core service in Bath. We cut out foam from rafters and roof decks, then vacuum the space clean. Most lofts are finished within one to three days.
loft spray foam removalroof spray foam removal
Roof spray foam removal is often needed when foam has been applied directly to the underside of tiles or felt. We remove it carefully to avoid damaging the roof covering, then check ventilation.
roof spray foam removalspray foam insulation removal
If your spray foam insulation removal is needed because the foam has failed or trapped moisture, we can help. We inspect with thermal imaging and moisture meters before quoting.
spray foam insulation removalopen cell spray foam removal
Open cell spray foam removal is usually quicker than closed cell because the foam is softer. We cut it back with hand tools and vacuum the residue, leaving the timbers ready for inspection.
open cell spray foam removalclosed cell spray foam removal
Closed cell spray foam removal is more labour-intensive because the foam is dense and rigid. We use reciprocating saws and oscillating multi-tools, and we take extra care around wiring and pipework.
closed cell spray foam removalmortgage lender spray foam removal
If your lender has refused a mortgage due to spray foam, our mortgage lender spray foam removal service provides the evidence and clearance they need. We document the roof condition and supply a written summary.
mortgage lender spray foam removalinsulation removal service
Our insulation removal service covers spray foam, contaminated mineral wool and damaged boards. It is often booked alongside an insulation assessment so you can plan the replacement correctly.
insulation removal serviceinsulation assessment
An insulation assessment tells you whether removal is necessary or whether the foam can stay. We use boroscope cameras and moisture meters, and we give you a straight answer with no obligation.
insulation assessmentdry ice blasting spray foam removal
Dry ice blasting spray foam removal is ideal for delicate surfaces and awkward corners. The dry ice pellets lift foam without abrasive damage, and the residue is vacuumed away.
dry ice blasting spray foam removalCavity wall spray foam removal
Cavity wall spray foam removal is often needed when foam has caused damp or bridging. We assess the cavity, remove the foam, and advise on reinstating cavity wall insulation correctly.
Cavity wall spray foam removalsand blasting spray foam insulation removal
For stubborn foam on masonry or steel, sand blasting spray foam insulation removal uses abrasive blasting media to strip it back. We contain the dust and dispose of waste responsibly.
sand blasting spray foam insulation removalthermal spray foam removal
Thermal spray foam removal uses heat to soften foam before cutting, which reduces dust and damage. It is useful on older Bath roofs where timbers are fragile.
thermal spray foam removalenvironmentally friendly insulation removal
Our environmentally friendly insulation removal service prioritises low-dust methods and responsible disposal. Foam waste is bagged and sent to licensed recycling or energy recovery.
environmentally friendly insulation removalWarehouse spray Foam removal
Warehouse spray foam removal is a specialist commercial job. We work at height with PASMA-trained teams and schedule around your operations to keep disruption low.
Warehouse spray Foam removalBook Attic spray foam removal in Bath today
If a surveyor or lender has flagged foam in your loft, do not wait. We are TrustMark registered, CHAS accredited and local to Bath. Call 0122 528 5137 for a free survey and a fixed price.