Spray Foam Removal near me in Bath done right, first time
Specialist spray foam removal close to me in Bath, Somerset
If you need Spray Foam Removal near me in Bath, our team removes open cell and closed cell foam from lofts, rafters and cavity walls without wrecking your timbers. We cover every Bath neighbourhood, from Kingsmead to Combe Down, and we work to mortgage lender standards so your sale or remortgage can move. Most jobs take one to three days.
What Spray Foam Removal near me in Bath involves
Spray Foam Removal near me in Bath is the controlled stripping of polyurethane foam from roof timbers, lofts and cavity walls, followed by cleaning and ventilation checks. We cut the foam back with a reciprocating saw and oscillating multi-tool, then blast the residue with a dry ice blasting machine or abrasive media. Dust extraction units and HEPA filter vacuum units run throughout so your home stays liveable. A boroscope inspection camera and moisture meter confirm the timber is clean and dry before we sign the job off.
Bath's Georgian and Victorian terraces were never designed for spray foam. When closed cell spray foam is pumped between rafters, it seals the roof, traps moisture and rots the timber underneath. Lenders flag it, surveyors write it up, and sales stall. If you are searching for spray foam removal near me Bath or spray foam removal near me Somerset, you are usually weeks away from a mortgage decision. We have handled this exact scenario across Somerset since 2021.
Why Bath homeowners book us
Removing spray foam is not a cosmetic job. Get it wrong and you damage the very timbers you are trying to save. Here is what our Bath customers actually get.
Mortgage-ready paperwork
Most lenders want proof the foam is gone and the roof is ventilated. We photograph every rafter, log moisture readings and issue a completion report your lender and surveyor can accept. That single document has unblocked sales in Widcombe, Oldfield Park and Bear Flat.
Timber saved, not scrapped
We remove foam by hand first, then dry ice blast the last millimetre so the wood grain stays intact. A chisel and scraper set handles the awkward corners near ridge beams. In most Bath lofts we save 90 per cent of the original timber, which is far cheaper than a full roof rebuild.
Dust kept out of your home
Foam dust is nasty. We seal doorways with protective sheeting, run HEPA filter vacuum units at the extraction point and use a dust extraction unit on every power tool. Customers in Kingsmead and Bathwick have stayed in the house while we worked, with nothing more than a faint hum from the kit.
Ventilation restored properly
Removing foam is half the job. We clear blocked soffit vents, check eaves gaps and confirm airflow with a thermal imaging camera before we leave. That is what stops the trapped moisture and rot coming back, and it is why our work passes a follow-up survey.
Our spray foam removal process
Every Bath job follows the same five stages. You will know what is happening, when, and what it costs before we start.
Survey and quote
We visit your property, usually within 48 hours of your call, and inspect the loft with a boroscope inspection camera and moisture meter. You get a fixed price the same day, covering labour, disposal and the completion report. No hourly surprises.
Containment setup
On day one we lay dust sheets, seal doorways with protective sheeting and position HEPA filter vacuum units. If you are staying in the house, we zone off the loft hatch and keep the rest of your home clean. Setup takes about 90 minutes.
Foam removal
We cut the bulk of the foam with a reciprocating saw and oscillating multi-tool, then finish with dry ice blasting or abrasive blasting media. A two-person crew clears a typical 30 square metre Bath loft in one to two days, depending on foam thickness and access.
Clean and inspect
Once the foam is gone we vacuum every surface, check the timbers with a moisture meter and photograph each rafter. If we find structural timber damage, we tell you straight away and quote the repair separately before touching it.
Report and handover
We restore ventilation, confirm airflow with a thermal imaging camera and hand you a completion pack with photos and readings. That pack is what your lender, surveyor or buyer will ask for. Most Bath customers receive it within 24 hours of the final clean.
Why choose our Spray Foam Removal near me in Bath
We are not a general builder who happens to own a saw. Spray foam removal is all we do, and it shows in the finish, the paperwork and the price.
Fixed prices, no surprises
You get a written fixed price after the survey, covering removal, disposal and the completion report. A typical Bath loft runs between 1,800 and 4,500 pounds depending on foam type and access. We do not add extras halfway through unless you ask us to.
Lender-approved reporting
We have supplied completion reports to mortgage lenders across Somerset since 2021. Each pack includes rafter-by-rafter photos, moisture readings and a ventilation statement. Surveyors accept it first time in the vast majority of cases, which keeps your sale on track.
Local spray foam removal Bath-wide
Our crews cover every Bath postcode, from Bath City Centre to Combe Down and Weston. We know which streets have restricted parking, which lofts have tight hatch access and which Victorian roofs need extra care. That local knowledge saves you time and money.
Clean site, every time
We use dust extraction units, HEPA filter vacuum units and protective sheeting on every job. Customers regularly tell us they expected chaos and got a tidy loft instead. If you want spray foam removal near me with free quote and a clean finish, call us on 0122 528 5137.
What our Spray Foam Removal near me in Bath includes
Every job is priced as a complete package, not a list of extras. Here is what you get as standard when you book spray foam removal with us in Bath.
Full loft survey
Before we quote, we inspect the foam with a boroscope inspection camera and check timber moisture with a moisture meter. You get a fixed price and an honest view of what needs removing.
Foam removal and disposal
We remove open cell and closed cell foam by hand, saw and dry ice blasting, then dispose of it through licensed waste routes. All labour, equipment and disposal are included in the price.
Dust control and clean-up
Dust sheets, protective sheeting, dust extraction units and HEPA filter vacuum units are used on every job. We leave the loft clean and the rest of your home untouched.
Ventilation restoration
We clear blocked soffit vents, check eaves gaps and confirm airflow with a thermal imaging camera. Restoring ventilation is what stops the moisture and rot returning after the foam is gone.
Completion report for lenders
You receive a pack with rafter-by-rafter photos, moisture readings and a ventilation statement. This is the document mortgage lenders and surveyors ask for, and we issue it within 24 hours of finishing.
Problems our Spray Foam Removal near me in Bath solves
Spray foam causes more problems than it solves in Bath's older properties. Here are the ones we see most often, and how we fix them.
Mortgage refusal due to spray foam
Your sale or remortgage stalls, and you may lose your buyer if the issue is not resolved quickly. Lenders treat spray foam as a structural risk until proven otherwise.
We remove the foam, restore ventilation and issue a completion report with photos and moisture readings. This is the evidence lenders need to release the mortgage. Most Bath cases are resolved within two weeks of the first call.
Trapped moisture and rot in roof timbers
Foam seals the roof, so condensation cannot escape. Timber stays wet, rot sets in, and the repair bill climbs the longer it is left.
We strip the foam back to clean timber, dry the roof space and reinstate airflow through soffit and eaves vents. A moisture meter confirms the timbers are dry before we sign off. Early removal usually saves the rafters.
Spray foam smell and fumes in the home
Poorly installed foam can off-gas for months, causing headaches and a chemical smell in upstairs rooms. It is unpleasant and can affect tenants or family members.
We remove the foam completely, including the residue that causes the smell, and ventilate the loft. Dry ice blasting and HEPA vacuuming keep the process clean. Customers in Bathwick and Kingsmead report the smell gone within days.
Difficulty selling a property with foam
Buyers walk away when they see spray foam, and estate agents often advise a price reduction. The property sits on the market while the problem remains.
We provide the removal and the paperwork that satisfies buyers and their solicitors. A clean, ventilated loft with a completion report removes the main objection. Many Bath sales complete within weeks of the work finishing.
When to book Spray Foam Removal near me in Bath
A lender has refused a mortgage because of spray foam in the loft.
We prioritise these jobs and can often survey within 48 hours. We remove the foam, restore ventilation and issue the completion report your lender needs. We have unblocked sales across Somerset since 2021.
Your mortgage offer is released and your sale completes without further delay.
You have bought a Bath terrace and discovered foam during renovation.
We strip the foam before your builders start on the roof, so timbers can be inspected and repaired if needed. We work alongside your contractor and keep the site clean.
The roof is sound, ventilated and ready for new insulation that suits the property.
A landlord needs foam removed between tenancies.
We schedule the work during void periods and keep disruption to a minimum. Fixed pricing means you can budget accurately, and the completion report satisfies lender and insurer queries.
The property is mortgage-ready and back on the rental market on schedule.
You have a damp smell or condensation in the loft and suspect foam.
We inspect with a boroscope camera and moisture meter, then remove the foam if it is trapping moisture. Ventilation is restored and airflow confirmed with a thermal imaging camera.
The smell clears, timbers dry out and the roof space becomes usable again.
Tools and methods we use
Tools & Equipment
Dry ice blasting machine
Freezes and lifts foam residue from timber without water or chemicals, leaving the wood grain intact and the loft dry.
Reciprocating saw and oscillating multi-tool
Cuts through thick closed cell spray foam quickly, with controlled blades that reduce the risk of gouging rafters.
HEPA filter vacuum unit
Captures fine foam dust and airborne particles at source, keeping your home clean and the air safe to breathe.
Boroscope inspection camera
Lets us see behind rafters and into cavities without opening up the structure, so we quote accurately and find hidden foam.
Thermal imaging camera and moisture meter
Confirms timber is dry and ventilation is working before we hand the job back to you or your lender.
Methods
Dry ice blasting
We use dry ice pellets to freeze and lift foam residue from timber. It is clean, chemical-free and ideal for Bath's older roofs where water damage is a concern. It also leaves no secondary waste beyond the foam itself.
Abrasive blasting
For foam bonded to brick or stone, we use abrasive blasting media to strip it back. Dust extraction units and protective sheeting keep the site controlled, and we check the surface afterwards before restoring ventilation.
Manual cutting and scraping
The bulk of the foam comes off with a reciprocating saw, oscillating multi-tool and chisel and scraper set. Hand work first means we protect the timber, then blasting finishes the job cleanly.
Ventilation reinstatement
We clear blocked soffit vents, check eaves gaps and confirm airflow with a thermal imaging camera. This step is what stops trapped moisture and rot returning after the foam is gone.
How Spray Foam Removal near me runs in Bath
Bath's building stock is a challenge. Georgian and Victorian terraces in Widcombe, Bathwick and Lansdown often have stone walls, tight loft hatches and original rafters that need careful handling. The city's damp climate means foam that seals a roof will trap moisture quickly, especially through autumn and winter. We see the worst cases in north-facing roofs where condensation has nowhere to go. If you are searching for spray foam removal in my area Bath, we will inspect with a boroscope camera and moisture meter, then remove the foam with dry ice blasting or abrasive media depending on the surface. We also check cavity wall insulation and loft insulation while we are there, because foam problems rarely travel alone. Most Bath jobs are completed within one to three days, and we issue the lender completion report within 24 hours of finishing.
Service Areas
Central Bath terraces with restricted parking. We plan deliveries and skip placement around permit zones to avoid fines and delays.
Many properties here have converted lofts with tight hatch access. We use compact equipment and hand tools to work in confined roof spaces.
Steep roofs and older timbers are common. We take extra care with rafters and check for structural timber damage before removing foam.
A high concentration of Victorian terraces with cavity wall insulation. We often combine spray foam removal with cavity checks in this area.
Stone-built properties with breathable walls. We avoid harsh methods and restore ventilation carefully to protect the original stonework.
Local Considerations
Damp, mild winters with high humidity
Foam seals the roof and traps condensation, so rot develops faster than in drier parts of the UK. We prioritise ventilation restoration on every Bath job.
Older stone and solid brick walls
These walls need to breathe. We avoid methods that drive moisture deeper into the structure and check cavity wall insulation while we are on site.
Tight loft access in period terraces
Access can add half a day to a job. We survey first and tell you upfront if access will affect the price or schedule.
Restricted parking in central Bath
We plan equipment and waste collection around permit zones in Kingsmead and the city centre to keep the job on schedule.
Mortgage unblocked in Widcombe terrace
A lender refused a mortgage on a three-bed terrace in Widcombe after a surveyor found closed cell spray foam across the entire roof. The sale was two weeks from collapse and the buyer was ready to walk.
We removed the foam in two days, cleaned the timbers and restored ventilation. The completion report went to the lender within 24 hours and the mortgage was released the following week. The sale completed on the original date.
Maintenance & Follow-up
We advised the new owners to check soffit vents annually and keep the loft clear of stored items that block airflow. A follow-up moisture check after 12 months confirms the timbers are still dry.
A homeowner in Combe Down had a chemical smell and condensation in the loft for months. Open cell spray foam had been installed over old insulation, trapping moisture against the rafters and causing early rot.
We removed the foam and contaminated insulation, dried the roof space and reinstated airflow. Moisture readings dropped from 28 per cent to 12 per cent within a week. The smell cleared and the loft became usable for storage again.
Maintenance & Follow-up
We recommended breathable insulation and an annual ventilation check. Keeping the eaves clear and avoiding sealed loft covers will prevent the problem returning.
A landlord with three Victorian terraces in Oldfield Park needed spray foam removed before selling the portfolio. Two of the lofts had closed cell foam and one had cavity wall spray foam causing damp patches on internal walls.
We cleared all three properties in five working days, removed the cavity foam and treated the damp. Each property received a completion report. The portfolio sold without any lender objections and the damp patches were gone.
Maintenance & Follow-up
The new owner was advised to monitor the cavity walls each spring and keep gutters clear. We carried out a free follow-up inspection six months later to confirm everything was dry.
How do I find spray foam removal near me in Bath?
Call Platinum Shield Spray Foam on 0122 528 5137 or request a survey online. We cover every Bath neighbourhood and can usually inspect within 48 hours. You get a fixed price the same day, and most jobs are booked within two weeks. We have worked across Somerset since 2021.
Is there a spray foam removal near me open now in Bath?
Yes. We run emergency call-outs for urgent mortgage deadlines and surveyor visits. If you need spray foam removal near me open now Bath, ring us and we will tell you honestly whether we can get a crew to you today. Standard bookings are typically within 48 hours.
Who offers spray foam removal close to me in Bath, Somerset?
Platinum Shield Spray Foam is a specialist spray foam removal contractor based in Bath, Somerset. We handle open cell and closed cell foam, cavity wall insulation and loft insulation removal. Our technicians hold NVQ Level 2 Insulation and we are TrustMark registered, so lenders accept our completion reports.
Can I get spray foam removal near me today in Bath?
Sometimes. Same day spray foam removal depends on crew availability and the size of your loft. Call before 10am and we will do our best. If we cannot get there today, we will book you in for the next available slot, usually within 48 hours, and give you a fixed price upfront.
Trust and proof
Certifications
Reviews
Removed closed cell foam from our loft in two days. The completion report was exactly what our lender wanted and the mortgage went through. Clean, professional and no hidden costs.
We had foam in three rental properties and needed it gone quickly. Platinum Shield worked around tenants and finished ahead of schedule. The fixed price was the price we paid.
Damp smell in the loft for months. They found trapped moisture under the foam, removed it with dry ice blasting and restored ventilation. The smell is gone and the timbers are dry.
Related Services
same day Spray Foam Removal
When a lender or buyer needs the foam gone fast, we mobilise a crew the same day where possible. Ideal for Bath sales that are about to exchange and cannot wait two weeks for a standard booking.
same day Spray Foam Removal24/7 Spray Foam Removal
Our phone line stays open around the clock for urgent spray foam problems in Bath. If you have a leak, a smell or a deadline, call any hour and we will arrange the earliest possible visit.
24/7 Spray Foam RemovalResidential Spray Foam Removal
Most of our Bath work is residential: terraces, semis, cottages and flats. We remove foam from lofts, rafters and cavity walls, then restore ventilation and issue the completion report your lender needs.
Residential Spray Foam RemovalCommercial Spray Foam Removal
We also strip spray foam from commercial roofs and warehouses across Somerset. Larger crews, out-of-hours working and full method statements are available for business premises in and around Bath.
Commercial Spray Foam Removalloft spray foam removal
Loft spray foam removal is our most common Bath job. We cut out the foam, clean the timbers and check ventilation so your loft is mortgage-ready and safe to use for storage again.
loft spray foam removalroof spray foam removal
Foam sprayed directly onto roof timbers traps moisture and rots rafters. We remove it carefully, inspect the wood and repair any structural timber damage before restoring airflow through the roof space.
roof spray foam removalAttic spray foam removal
Attic spray foam removal follows the same process as loft work, with extra care around tight hatch access and old stone walls. Common in Bath's older terraces where headroom is limited.
Attic spray foam removalspray foam insulation removal
If your insulation has been contaminated by damp, pests or poor installation, we remove it completely and dispose of it responsibly. We then advise on the right replacement insulation for your Bath property.
spray foam insulation removalopen cell spray foam removal
Open cell spray foam is softer and easier to remove than closed cell, but it still traps moisture. We strip it back, clean the timbers and confirm the roof space is dry with a moisture meter.
open cell spray foam removalclosed cell spray foam removal
Closed cell spray foam is dense and stubborn. We use reciprocating saws, oscillating multi-tools and dry ice blasting to remove it without gouging the timber underneath. This is the type lenders flag most often.
closed cell spray foam removalmortgage lender spray foam removal
When a lender refuses a mortgage because of spray foam, we provide the removal and the paperwork to unblock it. Our completion reports include photos, moisture readings and a ventilation statement accepted by Somerset surveyors.
mortgage lender spray foam removalinsulation removal service
Beyond spray foam, we remove contaminated or failed insulation from lofts and cavities across Bath. We dispose of it responsibly and can recommend a replacement that suits your property and budget.
insulation removal serviceinsulation assessment
Not sure whether your foam needs removing? We inspect with a boroscope camera and moisture meter, then tell you honestly whether it is a problem or not. The assessment takes about an hour.
insulation assessmentdry ice blasting spray foam removal
Dry ice blasting is our cleanest removal method. It freezes the foam residue and lifts it off the timber without chemicals or water, leaving the wood grain intact and the loft ready for ventilation checks.
dry ice blasting spray foam removalCavity wall spray foam removal
Cavity wall spray foam can cause damp and mortgage issues in Bath's older properties. We remove it, inspect the cavity and advise on breathable alternatives that suit solid stone walls.
Cavity wall spray foam removalsand blasting spray foam insulation removal
For stubborn foam on brick or stone surfaces, we use abrasive blasting media to strip it back cleanly. We control dust with extraction units and protective sheeting throughout.
sand blasting spray foam insulation removalthermal spray foam removal
Thermal spray foam removal uses heat and mechanical tools to soften dense foam before cutting. It is useful on thick closed cell applications where saws alone would risk damaging the timber.
thermal spray foam removalenvironmentally friendly insulation removal
We dispose of removed foam through licensed waste routes and avoid harsh chemicals where possible. Dry ice blasting and HEPA vacuuming keep the process as clean and low-impact as we can make it.
environmentally friendly insulation removalWarehouse spray Foam removal
Warehouse spray foam removal is a larger-scale job we handle across Somerset. We work out of hours to avoid disrupting operations and provide full method statements and risk assessments.
Warehouse spray Foam removalBook your Spray Foam Removal near me in Bath today
We are TrustMark registered, Which? Trusted Trader approved and have worked across Somerset since 2021. Call 0122 528 5137 for a fixed price and a survey within 48 hours.