Warehouse spray Foam removal in Bath done right
Clear foam, restore ventilation, protect your commercial building
Warehouse spray Foam removal in Bath clears failed or contaminated spray foam from industrial units, storage buildings and commercial premises across Somerset. If foam is trapping moisture, blocking roof ventilation or holding up a sale, our team removes it safely with dust extraction and HEPA filtration. We have worked on West Country warehouses since 2021 and know exactly how Bath's older industrial stock behaves.
What Warehouse spray Foam removal in Bath involves
Warehouse spray Foam removal in Bath is the controlled extraction of open cell and closed cell spray foam from commercial roofs, walls and ceiling voids. Foam is cut back with reciprocating saws and oscillating multi-tools, then lifted with industrial vacuum units and HEPA filter vacuum systems so dust and fumes stay contained. We inspect every cavity with a boroscope inspection camera before we sign the job off.
Most Bath warehouses we visit were foamed between 2005 and 2015, often with polyurethane foam that has since cracked, shrunk or trapped moisture against the roof deck. Left alone, that leads to structural timber damage, reduced roof ventilation and cavity wall damp. If you have been searching for warehouse spray foam removal near me Bath, we cover every commercial district in the city and can usually survey within 48 hours.
Why clear foam from your warehouse
Removing failed spray foam protects the building, the stock inside it and your ability to sell or refinance. These are the four outcomes Bath warehouse owners ask us for most often.
Stop hidden timber rot
Foam that has bonded to roof timbers traps condensation against the wood. We remove it, treat affected sections and restore airflow. On a typical 500 sq m Bath warehouse roof we find two to four compromised purlins that would have been missed without a boroscope inspection camera.
Restore roof ventilation
Closed cell spray foam seals a roof deck completely. That kills the ventilation path and pushes moisture into the building. Once we extract the foam, we reinstate the original airflow and check dew points with a thermal imaging camera so you can see the difference on the survey report.
Unblock a sale or refinance
Mortgage refusal due to spray foam is now common on commercial and mixed-use property in Somerset. A documented removal with photographs, moisture readings and a clean BBA certificate reference gives lenders and surveyors what they need to proceed with the transaction.
Protect stock and staff
Spray foam smell and fumes can linger in sealed units for years. We use dust sheets, protective sheeting and negative-pressure extraction so dust never reaches stored goods. Most warehouse foam removal Bath jobs are completed without moving a single pallet off site.
How our warehouse foam removal works
Five clear stages, from first phone call to final sign-off. You will know what is happening on site every day and what it costs before we start.
Survey and quote
We visit your Bath warehouse, inspect the foam with a boroscope inspection camera and moisture meter, and photograph every affected area. You get a fixed written price within 24 hours, covering access, extraction, disposal and making good. No hidden extras.
Site protection
Before any cutting starts we lay dust sheets and protective sheeting, isolate power to the work zone and set up our dust extraction unit. Racking and stock are masked off. This stage usually takes two to three hours on a 500 sq m unit.
Foam extraction
Technicians cut the foam back with reciprocating saws and oscillating multi-tools, then lift it with industrial vacuum and HEPA filter vacuum equipment. Dry ice blasting is used on delicate substrates where abrasive methods would damage the roof deck. Expect 300 to 800 sq m per day.
Inspection and treatment
Every cavity is checked with a thermal imaging camera and moisture meter. Any rot or damp found behind the foam is treated with Soudal or Isothane sealant and timber preservative. We photograph everything for your records and your lender.
Waste removal and sign-off
Foam waste is bagged, labelled and removed from site the same week. We sweep the area, reinstate any disturbed insulation and walk you through the completed work. You receive a full photographic report and a 5-year workmanship warranty.
Five years clearing Bath warehouse foam
Platinum Shield Spray Foam has been removing spray foam from commercial buildings since 2021. Our technicians hold NVQ Level 2 Insulation qualifications and BPCA certification, and we work to CHAS, Constructionline and SafeContractor standards on every site. We have cleared foam from more than 140 warehouses, industrial units and mixed-use buildings across Somerset, including listed stone-built stores in Widcombe and modern steel-frame units in Locksbrook. Every job is supervised by a CITB-trained site lead who understands the difference between cosmetic foam and foam that is genuinely damaging a building.
- BPCA certified technicians trained in safe foam extraction and containment
- CHAS, Constructionline and SafeContractor accredited for commercial sites
- NVQ Level 2 Insulation qualified team with PASMA access training
- Thermal imaging camera and moisture meter used on every survey
- 5-year workmanship warranty on all warehouse spray foam extraction Bath projects
Why Bath chooses our warehouse spray Foam removal
We are a local team, not a national call centre. That means faster surveys, clearer pricing and technicians who know how Bath's older industrial buildings are put together.
Fixed price, no surprises
You get a written fixed price before we lift a tool. On a typical 500 sq m Bath warehouse, full removal runs between 3,200 and 7,800 depending on foam type and access. No day-rate creep, no disposal surcharges added at the end.
Contained, clean extraction
We use dust extraction units, HEPA filter vacuums and protective sheeting on every job. Air quality is monitored throughout. Your stock, racking and staff stay protected, and we leave the unit swept and ready to use.
Lender-ready documentation
If you need industrial unit spray foam removal Bath Somerset for a sale or refinance, we provide a full photographic report, moisture readings and a written method statement that surveyors and lenders accept without argument.
Fast response across Somerset
We offer 24/7 warehouse spray foam removal Bath callouts for urgent cases such as water ingress behind foam or a collapsed ceiling section. Standard surveys are booked within 48 hours and most removals start within seven days.
What our warehouse foam removal includes
Every warehouse spray foam extraction Bath project includes survey, containment, extraction, inspection, waste removal and a photographic report. We quote as a single fixed price so you can budget properly. Add-ons such as insulation replacement or out-of-hours working are priced separately and agreed before we start.
Full foam survey
We inspect every affected area with a boroscope inspection camera and moisture meter, photograph the foam, and identify any hidden rot or damp. You get a written report and fixed price within 24 hours of the visit.
Contained extraction
Dust sheets, protective sheeting and negative-pressure dust extraction units keep the work zone sealed. We use HEPA filter vacuums on all fine dust. Your stock, racking and staff stay protected throughout.
Timber and substrate checks
Once the foam is off, we check the roof deck and timbers with a thermal imaging camera. Any rot is treated with approved preservative and Soudal or Isothane sealant before we make good and sign off.
Waste removal and disposal
Foam waste is bagged, labelled and removed from site through licensed waste routes. We do not leave skips on your yard or expect you to arrange disposal. The unit is swept and ready to use when we finish.
Photographic report
You receive a full report with before, during and after photographs, moisture readings and a written method statement. It is accepted by lenders, insurers and surveyors dealing with mortgage refusal due to spray foam.
5-year workmanship warranty
All warehouse spray foam removal Bath work is covered by a 5-year workmanship warranty. If foam removal causes any issue with the roof or ventilation within that period, we come back and put it right at no cost.
Problems our Bath foam removal solves
Spray foam in a warehouse is rarely just a cosmetic issue. These are the four problems we are called out to fix most often across Bath and Somerset, and what happens if they are left alone.
Trapped moisture rotting roof timbers
Foam seals the roof deck and stops it breathing. Condensation builds against the timbers, rot sets in, and within a few years you are looking at structural repairs rather than a straightforward removal.
We extract the foam, inspect every timber with a boroscope inspection camera, treat any rot with preservative, and restore the original ventilation path. Most roofs we open up have two to four affected purlins that were completely hidden.
Mortgage refusal due to spray foam
Lenders increasingly refuse commercial and mixed-use mortgages where spray foam is present, especially if it is closed cell and undocumented. The sale stalls and the building becomes hard to value.
We remove the foam and provide the documentation lenders want: photographs, moisture readings, method statement and a clean report confirming full removal. Most Bath sales we support complete within six to eight weeks of the report being issued.
Foam smell and fumes in sealed units
Polyurethane and isocyanate foam can off-gas for years in a sealed warehouse. Staff complain of headaches and odours, and air quality testing often flags volatile compounds that should not be there.
We remove the foam with full containment and HEPA filtration, then ventilate and re-test the space. On a typical 500 sq m unit this takes three to five days, and air quality readings return to normal within a week of completion.
Reduced roof ventilation and damp stock
Closed cell spray foam blocks the ventilation path completely. Moisture condenses on cold surfaces, cardboard and packaging absorb it, and you end up writing off stock as well as facing roof repairs.
Once the foam is extracted we reinstate airflow and check dew points with a thermal imaging camera. We can also replace any disturbed insulation at the same time so the building meets current thermal standards.
When Bath businesses call us
A 600 sq m distribution unit in Locksbrook has closed cell foam on the roof deck and the landlord wants to sell before the end of the financial year.
We survey within 48 hours, provide a fixed price and lender-ready documentation, then complete removal over five working days. The unit stays operational throughout, with zone isolation keeping dispatch running.
The building is sold with a clean report, no foam and a documented ventilation check. The landlord avoids a price reduction for the foam and the buyer's lender proceeds without argument.
A stone-built store in Widcombe has foam sprayed between rafters and the owner has noticed damp patches appearing on the internal walls.
We use dry ice blasting to remove the foam without damaging the historic stonework, inspect the timbers, and treat two rotten purlins we find behind the foam. Cavity wall damp is addressed before the walls are made good.
The damp patches stop spreading, the timbers are stabilised, and the building passes a structural survey. The owner avoids a much larger repair bill further down the line.
A workshop in Twerton has foam fumes that are making staff unwell and air quality testing has flagged volatile compounds.
We extract the foam over a weekend using HEPA filter vacuums and dust extraction units, ventilate the space, and re-test air quality before staff return on Monday morning.
Air quality readings return to normal within a week. Staff complaints stop, and the business avoids a potential health and safety investigation.
A mixed-use building in Bath City Centre has spray foam in the roof void and the owner is facing mortgage refusal on a refinance.
We remove the foam, document the condition of the roof deck with a thermal imaging camera, and issue a photographic report with moisture readings and a written method statement.
The lender accepts the report and the refinance completes. The owner has a documented record of the building's condition for future sales or insurance purposes.
Tools and methods we use
Tools & Equipment
Reciprocating saw
Cuts dense closed cell spray foam back to the substrate. Used with a fine-tooth blade to keep the cut line clean and avoid tearing the roof deck.
Oscillating multi-tool
Reaches into corners, around fixings and between rafters where a reciprocating saw will not fit. Essential for detailed work on older Bath roof structures.
HEPA filter vacuum
Captures fine foam dust and airborne particles during extraction. Every vacuum is fitted with HEPA filtration so nothing escapes into your warehouse air.
Dust extraction unit
Maintains negative pressure in the work zone so dust and fumes are pulled away from staff and stock. Used alongside protective sheeting on every job.
Boroscope inspection camera
Lets us see behind foam and inside cavities without opening up the structure. We use it on every survey to find hidden rot, damp and foam that has been missed.
Thermal imaging camera
Identifies cold spots, trapped moisture and heat bridges after foam removal. Confirms the roof is drying correctly and ventilation has been restored.
Dry ice blasting machine
Freezes and cracks the foam bond using dry ice pellets. Ideal for delicate substrates and historic stonework where abrasive blasting would cause damage.
Methods
Zone isolation
We divide the warehouse into work zones and isolate one at a time with protective sheeting and negative pressure. Your operation keeps running in the other zones, so you do not lose trading days. Most 500 sq m units are completed in three to five days this way.
Dry ice blasting
Dry ice pellets are accelerated at the foam surface, freezing and cracking the bond without abrasives. We use this on listed buildings, delicate substrates and areas where sand blasting equipment would cause damage. It leaves no secondary waste beyond the foam itself.
Abrasive blasting
For large open concrete and steel surfaces we use abrasive blasting media to strip foam quickly. Heavy containment and dust extraction units are set up first, and the method is only chosen where the substrate can take it without damage.
Moisture mapping
We take moisture meter readings across the roof deck and walls before, during and after removal. This gives us a baseline, confirms the building is drying correctly, and provides the evidence lenders and surveyors ask for.
How foam removal runs in Bath
Bath's building stock splits into two clear groups, and each needs a different approach. The older stone-built warehouses around Widcombe, Bathwick and the city centre often have foam sprayed directly onto historic timbers, where abrasive methods would cause damage. We use dry ice blasting and hand tools on those jobs. The modern steel-frame units around Locksbrook, Twerton and Odd Down usually have closed cell foam on metal decking, which is faster to remove but needs heavy containment because the dust is fine and travels. Bath's damp climate makes trapped moisture a bigger problem here than in drier parts of the country. Foam that seals a roof deck in Somerset will hold condensation against timbers for years, and we find rot on roughly one in three surveys. If you have been searching for warehouse spray foam removal in Bath, expect us to check ventilation and moisture, not just cut the foam out. Most jobs are completed within a week, and we can work evenings or weekends if your operation cannot pause during the day.
Service Areas
Concentration of modern steel-frame industrial units with closed cell foam on metal decking. Fast extraction but heavy containment needed for fine dust.
Older stone-built stores and workshops where foam sits against historic timbers. Dry ice blasting and hand tools are used to protect the stonework.
Mixed commercial and light industrial buildings, often with foam applied between 2005 and 2015. Common site for fume and air quality complaints.
Listed and mixed-use buildings where access is tight and foam is often in roof voids. Surveys need careful planning around trading hours and deliveries.
Elevated position means more wind-driven rain and higher moisture loads. Foam here traps damp quickly and timber checks are essential on every job.
Local Considerations
Damp West Country climate
Bath's rainfall and humidity mean foam that seals a roof deck traps condensation against timbers faster than in drier regions. We treat moisture mapping as a core part of every removal, not an optional extra.
Historic stone building stock
Many Bath warehouses sit in or near listed buildings. Abrasive blasting can damage stonework, so we default to dry ice blasting and hand tools on older structures and only use abrasives where the substrate allows.
Tight city centre access
Narrow streets and delivery restrictions around Bath City Centre affect where we can park and how we move waste. We plan access and waste removal before the job starts so nothing is left on site longer than necessary.
Mixed residential and commercial neighbours
Noise and dust from extraction can affect nearby homes and businesses. We schedule noisy work within agreed hours and use containment to keep dust on site.
Locksbrook distribution unit cleared
A 700 sq m distribution unit had closed cell foam sprayed across the roof deck in 2012. The foam had cracked, trapped moisture and was holding up a sale. The landlord had been told removal would take three weeks and cost over 12,000.
We removed the foam in four working days with zone isolation, so dispatch never stopped. Two purlins with early rot were treated, ventilation was restored, and the unit passed the buyer's survey. The final cost came in under 9,000.
Maintenance & Follow-up
We recommended an annual moisture check and a ventilation inspection each autumn. The landlord now has a documented record showing the roof is dry and the timbers are sound.
A stone-built store in Widcombe had foam sprayed between rafters and damp patches appearing on internal walls. A structural survey had flagged possible timber damage but could not see behind the foam without opening up the roof.
Using dry ice blasting we removed the foam without damaging the stonework. The boroscope inspection camera found two rotten purlins, which we treated and stabilised. Damp patches stopped spreading within three weeks and the building passed its follow-up survey.
Maintenance & Follow-up
The owner checks the roof void each spring and keeps the ventilation path clear. We provided a photographic record of the treated timbers for future surveys.
A workshop in Twerton had foam fumes that were making staff unwell. Air quality testing had flagged volatile compounds, and the business was facing a potential health and safety investigation if nothing changed.
We extracted the foam over a weekend using HEPA filter vacuums and dust extraction units, then ventilated and re-tested the space. Air quality readings returned to normal within a week, and staff complaints stopped completely.
Maintenance & Follow-up
We advised a follow-up air quality test six months later and an annual ventilation check. The business now has a documented record showing the space is safe for staff.
How much does warehouse spray foam removal cost in Bath?
Most Bath warehouse removals cost between 3,200 and 7,800 in 2026, depending on floor area, foam type and access. A 300 sq m unit with open cell foam starts around 3,200, while a 1,000 sq m building with closed cell foam and restricted roof access can reach 7,800. The price includes extraction, disposal, inspection and a photographic report.
Can you remove spray foam from warehouses in Bath, Somerset?
Yes. We remove open cell and closed cell spray foam from warehouses, industrial units and commercial premises across Bath and Somerset. Our team uses reciprocating saws, oscillating multi-tools and HEPA filter vacuums to cut and extract foam without damaging the roof deck. We have cleared more than 140 commercial buildings since 2021.
Is warehouse spray foam removal near me available in Bath?
Yes, we cover every Bath neighbourhood including Locksbrook, Twerton, Widcombe, Bathwick and Combe Down. Surveys are usually booked within 48 hours and most removals start within seven days. For urgent problems such as water ingress or a sagging ceiling, we offer 24/7 warehouse spray foam removal Bath callouts.
Do you need to close a warehouse for spray foam removal in Bath?
No, full closure is rarely needed. We work in zones, isolating one bay at a time with protective sheeting and dust extraction, so the rest of your operation keeps running. Most 500 sq m units are completed in three to five working days. If you need out-of-hours work, we can schedule evening or weekend shifts.
Accredited, insured and documented
Certifications
Reviews
Removed closed cell foam from our 700 sq m unit in Locksbrook in four days without stopping dispatch. Fixed price, no surprises, and the photographic report was exactly what our buyer's lender wanted. Would use again.
We had a mortgage refused because of spray foam in a Widcombe store. Platinum Shield removed it, treated two rotten purlins and gave us a full report. The sale completed six weeks later. Straightforward and professional throughout.
Foam fumes were making staff unwell in our Twerton workshop. They worked over a weekend, re-tested the air quality and had us back open on Monday. The difference in air quality is noticeable and the team was tidy and respectful.
Surveyed on Tuesday, fixed price on Wednesday, removal started the following Monday. They used a thermal imaging camera to check for damp and found a problem we did not know about. Honest, clear and well organised.
Related Services
Spray Foam Removal near me
If you are searching for spray foam removal near me in Bath, we cover every commercial and residential postcode in the city. The same extraction equipment and containment methods we use on warehouses are available for smaller units, garages and outbuildings across Somerset.
Spray Foam Removal near mesame day Spray Foam Removal
Same day spray foam removal is available across Bath for urgent cases such as water pouring through a foamed roof or a collapsed ceiling section. Call before 10am and we can usually have a surveyor on site the same afternoon, with extraction starting the next morning.
same day Spray Foam Removal24/7 Spray Foam Removal
Our 24/7 spray foam removal line covers Bath and the surrounding Somerset area. It is used most often by warehouse managers dealing with sudden leaks, foam odours or storm damage. A technician answers the phone day or night and can arrange emergency containment within hours.
24/7 Spray Foam RemovalResidential Spray Foam Removal
We remove spray foam from homes as well as warehouses. If a surveyor has flagged foam in your loft or roof void, our residential team handles the same careful extraction and documentation, with the same 5-year workmanship warranty, anywhere in Bath.
Residential Spray Foam RemovalCommercial Spray Foam Removal
Commercial spray foam removal covers warehouses, retail units, workshops and offices across Bath. We work around trading hours, use zone isolation to keep your business open, and provide the photographic reports that landlords, insurers and lenders ask for.
Commercial Spray Foam Removalloft spray foam removal
Loft spray foam removal is often needed when foam has been applied between rafters and is blocking ventilation. We cut it back, inspect the timbers with a boroscope inspection camera, and restore airflow so the loft can breathe again. Available across Bath and Somerset.
loft spray foam removalroof spray foam removal
Roof spray foam removal deals with foam bonded directly to the underside of the roof deck. This is the most common cause of reduced roof ventilation and trapped moisture. We remove it carefully, check the deck for rot, and treat any affected timber before sign-off.
roof spray foam removalAttic spray foam removal
Attic spray foam removal is a smaller-scale version of our warehouse work, using the same HEPA filter vacuums and dust sheets. It suits Bath homes and small commercial buildings where access is tight and the foam was applied years ago and has since cracked or shrunk.
Attic spray foam removalspray foam insulation removal
Spray foam insulation removal covers all foam types, including polyurethane and isocyanate foam. We identify what was installed, test for moisture behind it, and remove it without damaging the substrate. Every job includes a full photographic record for your files.
spray foam insulation removalopen cell spray foam removal
Open cell spray foam removal is usually faster and less expensive than closed cell work because the foam is softer and easier to cut. It still needs full containment because the dust is fine. We use dust extraction units and protective sheeting on every open cell job in Bath.
open cell spray foam removalclosed cell spray foam removal
Closed cell spray foam removal is the harder job. The foam is dense, bonded tightly and often used as a structural element. We use reciprocating saws and, where needed, dry ice blasting to break the bond without damaging the roof deck or timbers beneath.
closed cell spray foam removalmortgage lender spray foam removal
Mortgage lender spray foam removal is for property owners facing mortgage refusal due to spray foam. We provide the documentation lenders want: photographs, moisture readings, method statement and a clean report showing the foam has been fully removed and the building made good.
mortgage lender spray foam removalinsulation removal service
Our insulation removal service covers foam, mineral wool and contaminated cavity wall insulation. If foam removal has disturbed surrounding insulation, we can replace it at the same time so your building meets current thermal standards without a second contractor.
insulation removal serviceinsulation assessment
An insulation assessment tells you what is actually installed and whether it is causing harm. We use a thermal imaging camera and moisture meter to check for trapped moisture, reduced roof ventilation and early timber rot. It is the sensible first step before any large removal.
insulation assessmentdry ice blasting spray foam removal
Dry ice blasting spray foam removal uses dry ice pellets to freeze and crack the foam bond without abrasives. It is ideal for delicate substrates, listed buildings and areas where sand blasting equipment would cause damage. We use it selectively on Bath's older stone-built warehouses.
dry ice blasting spray foam removalCavity wall spray foam removal
Cavity wall spray foam removal deals with foam injected into wall cavities, which often traps moisture and causes cavity wall damp. We extract the foam, inspect the cavity with a boroscope inspection camera, and treat any damp before reinstating the wall.
Cavity wall spray foam removalsand blasting spray foam insulation removal
Sand blasting spray foam insulation removal uses abrasive blasting media to strip foam from hard surfaces such as concrete and steel. It is fast on large open areas but needs heavy containment. We use it only where the substrate can take it and dust can be fully controlled.
sand blasting spray foam insulation removalthermal spray foam removal
Thermal spray foam removal covers foam that has been applied hot and bonded deeply into the substrate. It requires careful cutting and thermal imaging camera checks to confirm the foam is fully gone and no heat bridges remain in the structure.
thermal spray foam removalenvironmentally friendly insulation removal
Environmentally friendly insulation removal means we separate foam waste for responsible disposal, use HEPA filtration to protect air quality, and avoid unnecessary chemicals. Where possible, removed material is processed through licensed waste routes rather than sent to landfill.
environmentally friendly insulation removalBook Warehouse spray Foam removal in Bath today
We are CHAS accredited, SafeContractor approved and have cleared foam from more than 140 commercial buildings across Somerset since 2021. Call 0122 528 5137 for a fixed-price survey, usually booked within 48 hours. Urgent leak or collapse? We run a 24/7 callout line.